-
Posts
-
Anybody know of a different manufacturer and part number for a plug repair set? I had an older set years ago that worked very well and now we own the freud 85-175 and they dont work very well.
http://www.pinske-edge.com/shop/product/447/repair-plug-cutter-set/
The set is $500 and I am not sure what brand he sells.
Contact Bill Wigginton (516) 338-5555
John, thereza set someone is selling in the fabnet for sale section for 25 bucks..looks like they used them quite a bit…but it might work for 25 bucks
I’ve been repairing solid surface countertops pretty much every working day for 20 years and don’t use plug repair kits. I rough cut a slightly oversized plug and sand it to size with a Makita 9031 1-1/8″ by 21″ belt sander, using an 80 grit belt. I connect the sander to a shop vac hose. I sand a very slight bevel on the edge of the plug. As I test fit it, I mark the high spots with a pencil, and gradually ease it to the point where it is almost flush with minimal gaps. The results are always beautiful.
- You must be logged in to reply to this topic.