[David Servi]

We currently have a two-unit system.  Each unit will purify 4500 Cubic Ft. of air per minute.  These units self-clean themselves using compressed air to remove dust from the filters into a drawer system for easy removal.  These units are located inside your shop, purifying the air internally (not exhausting to the outside).  This means that you will not have heat lost.
This can be used in solid surface application or if you are dry cutting stone.
$9350.00

[Andy Graves]

Please add contact information.

Thank You,

Andy

[Jon Olson]

How about some pics?

 

I think these are the units we have. If so they do a great job.

[David Servi]

Posted By Premier Enterprises on 29 Oct 2008 07:45 PM

We currently have a two-unit system.  Each unit will purify 4500 Cubic Ft. of air per minute.  These units self-clean themselves using compressed air to remove dust from the filters into a drawer system for easy removal.  These units are located inside your shop, purifying the air internally (not exhausting to the outside).  This means that you will not have heat lost.
This can be used in solid surface application or if you are dry cutting stone.  $9350.00 Please contact Dave or Sandi (715) 487-6161

[Jon Olson]

Got any Pics?

[David Servi]

[Jon Olson]

Now we’re talking.  On ours we extended the air out put up to the ceiling. From there we had a 25 foot long tube with holes in it which blows the air back down .

 

The units can be noisy we put a special foam inside kind of like a muffler to help bring down the decibels.

 

[David Servi]

Posted By Premier Enterprises on 30 Oct 2008 08:50 AM

[Author]

Posts