[Kurt Bonk]

I’m having an issue with seams on CeaserStone Jerusalem sand Honed finish. They stick out like a sore thumb because the gloss level of the glue joint against the deck.  Any ideas on how to dull it down so it blends? I’ve tried alot of different things so far and nothing works

[Robert Butts]

Call Chad or Ray at Glue Warehouse. Those guys will be able to help you.

[Andy Graves]

Tape both sides of the seam right up to the seam line. Make sure you cover the material completely.

Take steel wool or scotchbrite and dull down the glue line. Be careful not to touch the material or you will end up with a scatch on the material.

[Karl Crooks]

Posted By Andy Graves on 15 Dec 2011 06:45 PM

Tape both sides of the seam right up to the seam line. Make sure you cover the material completely.

Take steel wool or scotchbrite and dull down the glue line. Be careful not to touch the material or you will end up with a scatch on the material.

+1 on this

.

[Kurt Bonk]

Thanks to everyone for the suggestions.  I ended up using a little sand paper followed by wiping the seam down with a damp acetone rag. Looks great!

[Author]

Posts