-
AuthorPosts
-
February 27, 2011 at 2:36 pm #4929
We have for sale a 2007 Marmo Meccanica LCT 522.
Machine is in “like new” condition and has less than 300 hours. Sale
comes with all original tooling and additional tooling such as profile
wheels and polishing pads new and lightly used. Bought new from Marmo
Meccanica for $120,000.00 usd. Asking price is $40,000.00 will entertain all serious offers. Pictures sent on request
The LCT 522 can perform multiple different edge details including full
bullnose, half bullnose, pencil edge, bevels and flat polish. In
addition to squared off or inclined edges, the LCT polishes multiple
edge details and other convex shapes on slabs of marble or granite. The
machine is automatic and can work continuously; as long as the edges to
be polished have the same thickness the pieces can be inserted one after
another. Then they are carried by a conveyor belt through a group of
automatic polishing motors which bear a series of abrasives, from the
coarsest grain to the polisher. These abrasives are the same type as
those on a normal edge polisher. In the “LCT”, the slabs of marble or
granite are placed vertically, in the way they are normally handled.
This system, in addition to avoiding possible breakages of the material,
enables the machine to occupy less space and to reduce considerably the
working area required.
ADVANTAGES OF THE LCT 522:
. Fully automatic straight line polisher
. Production speeds of 35 to 60 lineal feet per hour
. No height restriction for material being processed, such as 2 ft. wide
x 10 ft. high
. The LCT will process from 1 to 6 cm thick material
. The LCT will profile and polish laminated edges
. Dimensions of machine are 18 ft. x 4 ft. x 5 ft.
. Requires very little space for set and operation
. LCT will polish 12″ x 12″ tiles
. User friendly computer program
. Very fast set up time from one profile to the next
. Machine has over 25 years of proven history
SPECIFICATIONS OF THE LCT 522:
. Number of Polishing Motors: 7
. Number of Beveling Motors: 2
. Total Water Consumption: 5 gallons/minute
. Total Power Requirement: 230v/3phase/60amps
. Total Dimension of Machine: 10ft x 4ft x 4ft
. Total Weight of Machine: 3,000lbs
. Extension Tables: Standard 3ft in length
. Working Speed: 30-60 Lineal feet per Hour
. Maximum Abrasive Size: 5″ or 130mm
. Minimum material size: 8 inches x 10 inches
. Maximum material size: NO MAXIMUM
Please feel free to email @ Jeremyrnagin@gmail.com or my cell is 504.982.2424, Thanks
Jeremy Nagin -
AuthorPosts
- You must be logged in to reply to this topic.