-
AuthorPosts
-
November 30, 2006 at 12:35 pm #441
Andy Graves
KeymasterWe got a booth. We have Fabricator Members going to the Expo. Now
what do you want to see at the booth? Should we have a runnway
with models, Keg, couches, fabrication training, t-Shirt giveaway,
drawing for millions worth of tools and product?Maybe I will dress Jon up in a FabNet Super Cape and have him man the bar.
November 30, 2006 at 12:37 pm #10428Bill Horine
MemberI think Mory doing a little Disco dancin will suffice.
November 30, 2006 at 12:51 pm #10432Joe Corlett
MemberAndy:
Your presence at the show should be very refined and sophisticated, demonstrating leadership and cutting-edge technologies.
I’m envisioning “The Man Show” with tools.
Juggily,
Joe
November 30, 2006 at 12:58 pm #10434Rob Parker
MemberWet T-Shirt contest!!!!
With women…sorry fellas.
November 30, 2006 at 1:26 pm #10435KCWOOD
MemberI’ll get going on the 10ft pole “solid surface” for the ladies to hang onto… anyone know what Diameter it needs to be? Will one manufacturer get jealous if I don’t make out of their product? With Jon in a cape, Mory disco dancin…. uh..I won’t go there…….
Disclaimer.. I have only heard that in some places ladies use a pole for different dance techniques and or wet t-shirt contest .I can neither confirm or deny any first hand knowledge of witnessing such a thing.
November 30, 2006 at 2:11 pm #10438Andy Graves
KeymasterKC,
Please forward your wife’s email to me. I have important information she needs to know about.
Thanks
November 30, 2006 at 3:17 pm #10442KCWOOD
MemberAndy… I know you need help at the Expo with this booth… so I would hope you would not divulge anything you know about a friend and fellow fabricator. I have kept very quite about about the Vegas party… but if you insist.. her email is
November 30, 2006 at 8:38 pm #10464Larry Babson
MemberSo what time is Rueben scheduled to do his lecture on counter top karma sutra and avoiding frostbite? And his lecture on dodging counter top chunks?
November 30, 2006 at 9:10 pm #10477Shane Barker
MemberAll kidding aside Andy, I think the main thing you should
have in the booth is fabricators networking with other fabricators to boost
membership.And then maybe a back
room with an open bar and KCs pole and the girls of course and…oh wait am I
saying this out loud?
Shane
December 1, 2006 at 3:21 pm #10574Jon Olson
MemberOkay here is a list of my demands.
1-Internet access so I can check my e-mail.
2-Chairs to rest my flat feet.
3-Water
4-Snacks.
5-Tools to play with.
December 1, 2006 at 3:35 pm #10576Drew Bitsko
MemberWe’ll have tools to play with in our booth Jon.
December 1, 2006 at 4:38 pm #10584Shane Barker
MemberOkay, so tell me that tools is a code word for girls.

Shane
-
AuthorPosts
- You must be logged in to reply to this topic.
