Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 4, 2013 at 3:20 pm #6168
    Andy Graves
    Keymaster

    What do you typically put on the curb of a shower? I was thinking 2 degrees would be good for a 4″ wide curb.

    November 4, 2013 at 4:36 pm #76607
    KCWOOD
    Member

    when I lay the stone thresholds, I slope 1/4″ over the 6″ width. Not sure how many degrees it works out to. Works ok with the door sweeps since the door typically swings both directions

    November 4, 2013 at 5:40 pm #76608
    Andy Graves
    Keymaster

    I will check in my cad program.

    November 4, 2013 at 5:42 pm #76609
    Andy Graves
    Keymaster

    It’s 2.29 Degrees. So I guess 2 Degrees would be fine.

    Thanks KC

    November 7, 2013 at 11:56 am #76638
    John Christensen
    Member

    1/8″ over 4″.  Or something in that neighborhood.

    Johnny C

    November 8, 2013 at 8:08 am #76645
    Jeffrey Smith
    Member

    2 degrees is a standard slope for thresholds. Jeff

    November 8, 2013 at 2:11 pm #76648
    Andy Graves
    Keymaster

    Thanks everyone, that is a big help.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.