Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • February 26, 2007 at 7:00 pm #825
    Mark Urbaniak
    Member

    does anyone have a dxf for Pegasus # 3121 they can send me. Thank you

    MUrban104@aol.com

    February 27, 2007 at 9:38 am #15690
    Tom M
    Member

    MUrban,

    When I needed (a different) Pegasus sink dxf, I had to call them, but they responded pretty quick.

    I’m trying to find the phone number online, but they are pretty obtuse about it on their site.

    If I recall, the location for the company was on the box, and that’s how I got the number. It almost seems like it is a Blanco home center product.

    Tom

    February 27, 2007 at 4:06 pm #15720
    Seth Emery
    Member

    MUrban,

    I’ll check in the morning to see if I have that model. I can remember doing some Pegasus sinks, and they weren’t the easiest to create a dxf file for because of consecutive arcs, etc.

    Have a nice evening,

    Seth

    February 27, 2007 at 5:17 pm #15725
    Mark Urbaniak
    Member

    Tom,

    No phone # on the box, Just Home Depot…………LOL…..No luck on there site either, looks like I’ll have to draw it myself, let me know if you fined the #, Thanks for looking

    February 27, 2007 at 5:20 pm #15726
    Mark Urbaniak
    Member

    Seth,

    Thank You ,sure would save me some time in the morning

    February 27, 2007 at 6:49 pm #15730
    Tom M
    Member

    No phone # on the box, Just Home Depot…..

    That’s funny, the box my customer brought in had no mention of HD at all. It definitelly was bought there, though.

    I may be completely daft on this, but I thought they were in Pennsylvania.

    I will look in the morning.

    Tom

    February 28, 2007 at 11:19 am #15779
    Dennis Schafer
    Member

    Some of the Pegasus sinks that we have installed are made by BlancoUSA and some are made by a UK company called Astracast. http://www.astracast.com

    February 28, 2007 at 3:39 pm #15789
    Seth Emery
    Member

    MUrban,

    Sorry, I came up empty. I hope things worked out well for you.

    Have a nice evening,

    Seth

    February 28, 2007 at 5:30 pm #15792
    Mark Urbaniak
    Member

    Seth ,

    Thanks for looking, I will send it to you, Had to do it the hard way draw it………..LOL, Just need your E-mail

    February 28, 2007 at 8:28 pm #15800
    Seth Emery
    Member

    MUrban,

    Thanks. My email is seth77@ptd.net . I will also upload the file to the user-submitted section of The Fabricator Network CAD/DXF Library if you don’t mind.

    Have a good one,

    Seth

    January 26, 2009 at 11:51 am #49251
    Arkady Pashkovsky
    Member

    hello, i just came by this forum looking for a  pegasus #3121  sink dxf drawing and i am looking for a dxf that i can use to cut on a waterjet , i see that you may have something and  i saw that you guy were talking about uploading it but i never found it. any help would be nice thanks

    January 26, 2009 at 6:54 pm #49265
    Seth Emery
    Member

    Sorry, but I don’t have the file to upload. If anyone has this file, please send it to me at seth77 at ptd.net so I can upload it.

    Have a nice evening,
    Seth

    January 28, 2009 at 5:33 pm #49330
    Seth Emery
    Member

    Thanks to Mark U. for re-emailing me the file. I apologize that it was misplaced. It is now in the CAD Library.

    Have a good one,
    Seth

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.