Ed, This is great and this is a pain in the butt! who do ya listen too???? I Polish this way and this is no offense to others. I use a festool 6″ sander with the vac and the micron paper has the festool pattern cut into it, I also use a milwaukee polisher with a 100% wool pad and i use a new 3m mixture combination mixture of compound and finish all mixed up in one bottle. Anyway I sand with 60 (not on Rotex mode) then 30(not on rotex mode) wipe off all dust then put material on top and rub it all around with out the buffer turned on, then polish slowly on #2 on the speed which is probaly 25rpms who knows and don’t hold the buffer on an angle like certain fab manuals say, that might cut in too much and blemish burn.
If you call me i’ll help ya, However, we are back to the problem,Who ya gonna call? I think that is awesome We are all friends here and when someone asks for help we all respond, so good luck I have Refresh Polish packages available which have 60,30mic, Dust removal pad buffer wheel and new 3m mixture packs which is enough for 4 sheets only. Festool Sander and Vac not included or buffer, but i know a good Festool guy. If you have a Gloss meter my polish also falls into the 92 -95 range depending on the color, Avonite k-3 Dark colors are my favorite..call me if you have any questions at 727 527-0206 or my cell 727 459-0936
